Check safety-related components when repairing cars damaged in a collision
|
Check safety-related components when repairing cars damaged in a collision
|
Cars with triggered seat-belt tensioner and/or side airbag
|
When repairing a car with only a triggered seat-belt tensioner and/or side airbag, the components must be replaced as follows.
The control module can be used a maximum of three times for activating a seat-belt tensioner and/or side airbag.
Check and if necessary repair or replace the wiring harness for the side impact sensor, side airbag and seat-belt tensioner
Cars with a triggered seat-belt tensioner
When repairing a car with a triggered seat-belt tensioner, the following components must always be changed:
•
|
all front-seat seat belts with seat-belt tensioner (1)
|
•
|
all rear-seat seat belts in use when the collision occurred (2).
|
Cars with a triggered side airbag
When repairing a car with a triggered side airbag, the following components must always be changed:
•
|
Side impact sensor, side airbag and back upholstery bag (3).
|
Warning
|
The back upholstery bag must
always
be replaced when the side airbag has been triggered. Damaged or repaired back upholstery bag can impair the function of the side airbag.
|
|
|
|
|
Cars with a triggered airbag
|
When repairing a car with a triggered airbag, the following components must always be changed:
•
|
steering wheel, airbag and steering column assembly (1)
|
•
|
coil spring (contact roller) (2)
|
•
|
all front-seat seat belts with seat-belt tensioner (4)
|
•
|
all rear-seat seat belts in use when the collision occurred (5)
|
•
|
Passenger side airbag (if fitted) as well as dashboard (6)
|
•
|
Side air bags, with respective sensor and upholstery bag, which were triggered in the collision (7)
|
The following components must be inspected for burn damage and deformation:
Change damaged components.
Warning
|
Change all the seat belts if it cannot be determined with certainty which belts were in use when the collision occurred.
|
The seat belt on the passenger side must always be changed, even if it has not been used. This is because the seat-belt tensioner has been triggered.
|
|
|
|
|