SAAB WIS ONLINE

Stepping motor, air-blending LH

Stepping motor, air-blending LH

To remove

Put the air-mix control to max cold or max heat before commencing removal.


1. LHD: Remove the bottom of the panel (3 screws) (A) and detach the diagnostics socket (2 screws) and the floor lighting (B).


RHD: Remove the glove box and centre console (A). See Glove box .


2. Uncouple the stepping motor connection (C).


3. Remove the stepping motor (D), 2 screws.


To fit


1. Fit the stepping motor (D), 2 screws.


2. Couple in the stepping motor connection (C).

3. LHD: Fit the diagnostics socket (2 screws) and floor lighting (B).


4. LHD: Fit the lower part of the panel (3 screws) (A).

RHD: Fit the glove box and centre console (A). See Glove box .