Section of front wheel housing
|
Section of front wheel housing
|
1.
|
Remove the front wing.
|
2.
|
Remove the bumper member.
|
3.
|
Drill out the spot-welds from the outer wheel housing panel.
|
4.
|
Cut the wheel housing panel.
|
1.
|
Cut the new wheel housing panel to fit.
|
2.
|
Apply welding primer to the surfaces that are to be welded.
|
3.
|
Fit the wheel housing panel and fixate with a couple of welding clamps.
|
4.
|
Weld on the wheel housing panel.
|
6.
|
Fit the bumper member.
|
7.
|
Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.
|
8.
|
Apply primer to all bare metal surfaces.
|
9.
|
Seal joints and seams with sealant.
|
10.
|
Apply underseal to the underbody and in the wheel housing after painting. Use Terostat 9320.
|
11.
|
Apply anti-corrosion agent to the interior of the frame member after painting. Use Terotex HV 400 or Mercasol 1.
|