SAAB WIS ONLINE

Boot lid 4D, lock

Boot lid 4D, lock

To remove


1. Remove the Boot lid trim, 4D .

2. Remove the cover.


3. Turn the clip securing the locking rod for the lock motor driver and detach the locking rod.


4. Unscrew the three screws holding the lock.

5. Take out the locking rod and the lock.

6. Remove the connector.

7. Transfer the locking rod to the new lock.


To fit


1. Plug in the lock's connector.


2. Position the lock with locking rod.

3. Screw on the lock.

4. Fit the clip holding the locking rod to the lock motor driver.

5. Fit the cover


6. Fit the Boot lid trim, 4D .