SAAB WIS ONLINE

Front doors

Front doors

To remove



1. Disconnect the wiring harness in the door.

2. Remove the door stop from the A-pillar.

3. Unscrew the nut from the lower hinge mounting first.

4. Unscrew the nut from the upper hinge mounting while supporting the door.

5. Carefully lift off the door from the hinge mountings.


To fit



1. Lift the door onto the hinge mountings.

2. Screw on the nuts.

3. Check the fit between the front and rear doors and tighten the nuts.

Note

To obtain the correct fit between the front and rear doors, it may be necessary to slightly lift the rear of the door while tightening the nuts.


4. Fit the door stop to the A-pillar.

5. Connect the wiring harness in the door.

6. Check the electrical functions in the door, window lifts, lock, etc.

7. Connect the diagnostic tool and clear any diagnostic trouble codes.