Bumper shell, front
Bumper shell, front |
To remove |
1. |
Cars with engine block heater:
Remove the connector, 2 screws and 2 nuts.
E85 : Remove the retaining clip and the connector from the engine heater. Remove the ground cable and cable tie. |
2. |
Raise the car and remove the front spoiler shield.
|
3. |
Lower the car to a suitable work height.
|
4. |
Remove the bumper shell bolts at the wing liner on both sides.
|
5. |
Detach the shell from the side retainer on the left side. Release the catch with a screwdriver.
|
6. |
Press the lock lug and remove the connector from the clip on the left side. Disconnect the connector.
|
7. |
Cars with headlamp washing
: Place a container under the car. Remove the quick-release coupling of the headlamp washer hose. Plug the hole of the washer fluid reservoir connection.
|
8. |
Detach the shell from the side retainer on the right side. Release the catch with a screwdriver.
|
9. |
Remove the upper clips of the bumper shell. Remove the bolts.
|
10. |
Lift away the bumper shell with the help of an assistant.
|
To fit |
1. |
Lift the bumper shell in place with the help of an assistant.
|
2. |
Fit the upper clips of the bumper shell. Fit the bolts.
|
3. |
Press the shell rearward and press the shell into the retainer on the right side.
|
4. |
Fit the wing liner bolts on the right side.
|
5. |
Plug in the connector and fit it on the clip on the left side.
|
6. |
Cars with headlamp washing
: Remove the plug and connect the hose's quick-release coupling to the washer fluid reservoir.
|
7. |
Press the shell rearward and press the shell into the retainer on the left side.
|
8. |
Fit the wing liner bolts on the left side.
Cars with engine block heater: Fit the connector in the holder and tighten it with 2 screws and 2 nuts. The cover must open towards the centre of the car. E85 : Plug in the connector for the engine heater and fit the retaining clip over the connector. Fit the ground cable and cable tie. |
9. |
Raise the car.
|
10. |
Front the front spoiler shield.
|
11. |
Lower the car to the floor.
|