Protective mouldings, front and rear doors
|
|
Protective mouldings, front and rear doors
|
|
1.
|
Use a screwdriver to prise out the rear edge of the moulding. Protect the paintwork with tape.
|
|
2.
|
Pull out the clips from the door.
|
|
3.
|
Pull back the moulding from the front mounting.
|
|
Note
|
|
Make sure the protective caps are fitted in the door.
|
|
1.
|
Push in the front mounting in the door.
|
Important
|
|
Do not remove the protective tape on the front mounting, as the moulding may then stick instead of sliding easily on the door.
|
|
|
|
|
2.
|
Press on the moulding.
|
|
Protective moulding, front wing
|
To remove
|
•
|
Prise out the rear of the moulding. Protect the paintwork with tape.
|
To fit
|
Note
|
|
Make sure the protective caps are fitted in the front wing.
|
