Automatic antidazzle rear-view mirror, fault diagnosis hints
| Automatic antidazzle rear-view mirror, fault diagnosis hints |
The interior rear-view mirror with automatic antidazzle function can be activated when the ignition switch is in the drive position (+54).
The ADM control module is grounded by pin 8 (via crimp 46) to grounding point G42 (LHD) or G40 (RHD).
ADM control module is supplied voltage with +54 to pin 3 and +15 to pin 5.
| 1. |
Check that fuses 21 and 2 are intact and supplied with current.
|
|
| 2. |
Check that the rear-view mirror control module (637) is supplied with current.
|
|
| 3. |
Check the wiring harness, connectors and ground connections.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
