Defroster cover

/ 9-5 (9600) / 2008 / 8. Body / Interior equipment / Adjustment/replacement / Defroster cover

To remove

1.	Remove the A-pillar trims.

2.	Remove the speaker grille (A) on both sides.

3.	Remove the cover for the solar sensor (B) in the centre of the panel's front edge.

4.	Take out the clips (A) for the defroster cover on both sides.

5.	Undo the nut (B) for the defroster cover, the hole is slotted.

6.	Lift away the defroster cover (C).

To fit.

1.	Refit the defroster cover (C).

2.	Screw in the nut (B) for the defroster cover.

3.	Fit the clips (A) for the defroster cover on both sides.

4.	Fit the cover for the solar sensor (B) in the centre of the panel's front edge.

5.	Fit the speaker grille (A) on both sides.

6.	Fit the trim on the A pillars.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.