Gaiter on handbrake lever
Gaiter on handbrake lever |
1. |
Manual gearbox:
Lift up the gear lever gaiter.
Automatic transmission: Remove the rim with a small screwdriver. |
2. |
Remove the compartment or, alternatively, the
ashtray
with holder using a screwdriver.
|
3. |
Remove the two screws of the gear lever cover and lift it upwards and backwards.
|
4. |
Unplug the connector for the central locking system switch.
|
5. |
Unplug the connectors of the seat heating switches (keep track of the left and right connector) and the cigarette lighter.
|
6. |
Remover the rear part of the centre console by lifting it straight up.
|
7. |
Manual gearbox:
Engage reverse and remove the key.
Automatic transmission: Select the P position and remove the key. |
8. |
Turn the theft protection antenna unit clockwise, lift it (bayonet fitting) from the ignition switch and unplug the connector. Insert the key and engage neutral.
|
9. |
Remove the switches for the electric windows and unplug the connectors.
|
10. |
Remove the screws holding the upper part of the centre console, 6 screws.
|
11. |
Remove the clip that holds the gaiter in place. Remove the gaiter from the upper part of the console.
|
12. |
Lift out the upper part of the centre console.
|
13. |
Pull the gaiter forwards over the lever (destructive removal).
|
14. |
Prise off the plastic sleeve with a screwdriver.
|
To fit |
1. |
Invert the gaiter over the sleeve and thread the sleeve onto the handbrake lever.
|
2. |
Re-invert the gaiter and press the sleeve as far as possible onto the lever.
|
3. |
Fit the gaiter and press the clip to the upper part of the console into place.
|
4. |
Lift back the upper part of the centre console. At the same time, carefully position the leads. Be careful with the lead for the theft protection system.
|
5. |
Screw the upper part of the centre console in place, 4 front screws.
|
6. |
Fit the spring and the two rear screws to the upper part of the centre console.
|
7. |
Connect and refit the switch for the electric window lifts.
|
8. |
Refit the rear part of the centre console.
|
9. |
Plug in the connectors of the cigarette lighter and heated seat switches.
|
10. |
Plug in the central locking switch connector.
|
11. |
Refit the gear lever cover, 2 clips at the back and 2 screws at the front.
|
12. |
Refit the compartment or
ashtray
with holder.
|
13. |
Manual gearbox:
Fit the gear lever gaiter.
Automatic transmission: Fit the rim around the selector lever housing. |
14. |
Manual gearbox:
Engage reverse and remove the key.
Automatic transmission: Select the P position and remove the key. |
15. |
Plug in the connector to the theft protection antenna unit. Refit the antenna unit (bayonet fitting).
|