Armrest upholstery, rear seat 5D
|
Armrest upholstery, rear seat 5D
|
1.
|
Lower the armrest and detach the upholstery tab from the edge of the plate. Remove the four nuts and lift off the armrest.
|
2.
|
Remove the blank washer or cup holder if fitted.
Remove the cup holder by pressing it out half way. Bend the lock tabs out of the way with a screwdriver while pulling the cup holder out of the armrest.
|
3.
|
Loosen the Velcro fastening
|
4.
|
Cut off the clips holding the upholstery to the cushion and pull of the upholstery.
|
1.
|
Fit the armrest upholstery, make sure it is in the correct position.
|
2.
|
Fit the clips with the pliers included with fitting kit 84 71 062.
|
3.
|
Close the Velcro fastener.
|
4.
|
Press in the blank washer or cup holder.
|
5.
|
Fit the armrest to the rear seat backrest with the 4 nuts and fasten the upholstery tab to the edge of the plate.
Raise the armrest.
|