P0118
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on. A/C not functioning. The radiator fan runs continually.
P0118 |
Temperature Sensor in Air Mass Meter. Open/Short to B+
Fault symptoms
• |
CHECK ENGINE lamp on.
|
• |
A/C not functioning.
|
• |
The radiator fan runs continually.
|
On-Board Diagnostics
Enable criteria:
- |
Turn Ignition On.
|
Fault criteria:
- |
Voltage on the control module sensor input greater than 4.8 V.
|
- |
The condition above must be fulfilled for at least 0.48 s.
|
System reaction to a fault:
- |
A/C function deactivated.
|
Check the wiring
A fault in the control module's female connector can generate a DTC. Check the contact for oxidation, dislodge pins and pin clamping force.Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this. Check switches, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.
For more information, see also:
- "Read Values" menu for a description of read values.
- "Activate" menu for a description of applications.