SAAB WIS ONLINE

P0182

Read the instructions below then start the fault diagnostic procedure.

Symptom:

P0182


Fuel Temperature Sensor Circuit. Short to Ground

On-Board Diagnostics

Type of diagnosis:


- Continuous


Fault criteria:


- Voltage on the control module input less than 0.23 V for more than 0.6 s.


System reaction to a fault:


- The control module uses 50 degrees C as a substitute value.


Check the wiring

A fault in the control module's female connector can generate a DTC. Check the contact for oxidation, dislodge pins and pin clamping force.

Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this. Check switches, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.

Diagnostic help

Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.

For more information, see also:

- "Read Values" menu for a description of read values.

- "Activate" menu for a description of applications.