P0654
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
No A/C function.
Voltage Supply Group 3. Short to Ground.
Fault symptoms
On-Board Diagnostics
Type of diagnosis:
Enable criteria:
Fault criteria:
-
|
Control module output shorted to B+/open circuit.
|
System reaction to a fault:
-
|
A/C function deactivated.
|
Check the wiring
A fault in the control module's female connector can generate a DTC. Check the contact for oxidation, dislodge pins and pin clamping force.
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this. Check switches, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.
Diagnostic help
Diagnosis of:
•
|
Diagnosis checks the power supply to:
|
•
|
Particle filter pressure sensor, exhaust system
|
For more information, see also:
-
"Read Values" menu
for a description of read values.
-
"Activate" menu
for a description of applications.