P2135
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE lamp on.
Not possible to control engine speed.
Idling set to 1400 rpm.
Pedal Position Sensor Circuit. Plausibility Fault Between Circuit 1 and 2.
Fault symptoms
•
|
Not possible to control engine speed.
|
•
|
Idling set to 1400 rpm.
|
On-Board Diagnostics
Type of diagnosis:
Enable criteria:
Fault criteria:
-
|
The control module detects a general plausibility fault in the pedal position sensor.
|
System reaction to a fault:
-
|
Limp Home, engine speed limitation.
|
Check the wiring
A fault in the control module's female connector can generate a DTC. Check the contact for oxidation, dislodge pins and pin clamping force.
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this. Check switches, connectors and crimp connections for oxidation, dislodged pins and pin clamping force.
Diagnostic help
Diagnostic tool functions related to this fault are:
•
|
Pedal position sensor 1
|
•
|
Pedal position sensor 2
|
For more information, see also:
-
"Read Values" menu
for a description of read values.
-
"Activate" menu
for a description of applications.