Particle filter/rear catalytic converter
Particle filter/rear catalytic converter |
To remove |
1. |
Undo the clamp and remove the rear exhaust system.
|
2. |
Detach the hose for pressure drop measurement from the particle filter/rear catalytic converter.
|
3. |
Remove the temperature sensor (602R).
|
4. |
Remove the three nuts connecting the particle filter/rear catalytic converter to the front exhaust pipe.
|
5. |
Remove the rear mounting of the particle filter/rear catalytic converter from the body and lower the particle filter/rear catalytic converter.
|
6. |
Remove the mounting from the particle filter/rear catalytic converter.
|
To fit |
1. |
Fit the mounting to the particle filter/rear catalytic converter.
|
2. |
Position the particle filter/rear catalytic converter and use a new gasket. Fit the rear mounting to the body.
|
4. |
Lubricate the temperature sensor threads with
90 513 210 Universal paste
and fit the temperature sensor.
Tightening torque: 45 Nm (33 lbf ft) |
5. |
Attach the hose for pressure drop measurement to the particle filter/rear catalytic converter. Check that the protective sleeve covers the connection.
|
6. |
Fit the rear exhaust system and tighten the clamp.
|
7. |
If a new catalytic converter has been fitted
: Connect the diagnostic tool to restore adaptation values.
|