Charge air pipe
Charge air pipe |
To remove |
1. |
Remove the upper engine cover.
|
2. |
Undo the bolt securing the bypass pipe at the turbocharger intake pipe.
|
3. |
Remove the charge air bypass valve from the charge air pipe.
|
4. |
Unplug the connector on the charge air pipe for the pressure/temperature sensor.
|
5. |
Undo the hose clips at the throttle body and charge air hose.
Man.: Detach the venturi hose from the charge air pipe |
6. |
Unscrew the bolt securing the charge air pipe to the bracket on the cylinder head and remove the pipe. Cover the throttle body and charge air hose.
|
To fit |
1. |
Remove the seal from the throttle body and delivery hose.
|
3. |
Connect the charge air hose to the pipe. Tighten the hose clip and bolt on the cylinder head.
|
4. |
Plug in the pressure/temperature sensor connector.
|
5. |
Connect the bypass valve and tighten the bypass pipe on the turbocharger intake pipe.
(6 lbf ft) |
6. |
Fit the upper engine cover.
|