Adjusting the accelerator pedal cable.
| Adjusting the accelerator pedal cable. |
| 1. |
Remove the engine cover.
|
|
| 2. |
Undo the cable adjuster clip.
|
|
| 3. |
Adjust the free play in the cable by holding the pedal arm in the fully spring-loaded return position with one hand while moving the cable towards a taut position with the other hand. Then, slacken it to the nearest groove on the sleeve.
|
|
| 4. |
Fit the clip.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
