SAAB WIS ONLINE

CD changer (4D)

CD changer (4D)

To remove



1. Connect Tech 2.

2. Establish communication with the CD changer (CDC).

3. Select “ Programming ” from the system menu.

The text “ Marriage/Divorce ” is displayed.

4. Press “ ENTER ”.

5. Select “DIVORCED” with the change button and press “ OK ”.

• “ DIVORCED ” must be selected when removing the CD changer (to be installed in another car or to be returned for warranty repair).

6. The sound should disappear and “CDC CODE” is displayed on the SID.

7. Remove the four screws holding the CD changer and CD magazine.

8. Unplug the connector.


To fit



1. Remove 4x transit screws (2 marked red on each side) from the new CD changer.

2. Fit the CD changer with the four screws and plug in the connector.

Important

Check that the vertical/horizontal setting on the short side of the CD changer is in the vertical (V) position.


3. While Tech 2 is still connected and communicating, select “ Programming ” from the system menu.

The text “ Marriage/Divorce ” is displayed.

4. Press “ ENTER ”.

5. Select “MARRIED” with the change button and press “ OK ”.

6. “CDC CODE” disappears from SID and the sound returns.


Warning

The CD changer is a Class 1 laser product.

• The CD changer should only be serviced and repaired by a qualified technician.

• If the casing of the CD changer is damaged, there could be laser radiation with risk of injury.