Replacing the belt pulley, 4-cyl

/ 9-5 (9600) / 2009 / 3. Electrical System / Charging systems / Adjustment/replacement / Replacing the belt pulley, 4-cyl

To remove

1.	Remove the alternator, see Replacing the alternator, 4-cyl LHD and Replacing the alternator, 4-cyl RHD .

2.	Remove the belt pulley

•

Remove the belt pulley (A). Use special tool EN-48958.

To fit

1.	Fit the belt pulley (A). Use special tool EN-48958. Tightening torque: 80 Nm (59 lbf ft)

2.	Fit the alternator, see Replacing the alternator, 4-cyl LHD and Replacing the alternator, 4-cyl RHD .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.