B1605
Read the instructions below then start the fault diagnostic procedure.
Symptom: Varies depending on fault characteristics.
| B1605 |
Fault symptoms
Varies depending on fault characteristics.Conditions
The control module on-board diagnostics has detected an internal fault.Check wiring harness.
Jiggle the wiring harness at several points and in different directions to reveal intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic instrument during the test.This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
