Light cluster in tailgate, 5D

/ 9-5 (9600) / 2009 / 3. Electrical System / Lighting and signalling systems / Adjustment/replacement / Light cluster in tailgate, 5D

Removal

1.	Open the tailgate.

2.	Remove the access panel in the trim.

3.	Remove the rubber plug

4.	Unplug the connector.

5.	Unscrew the nuts securing the light cluster.

6.	Remove the light cluster.

Refitting

1.	Check that the seal is correctly positioned and is undamaged. Fit the light cluster in place.

2.	Fit the nuts.

3.	Fit the connector.

4.	Fit the rubber pug

5.	Fit the access panel in the trim.

6.	Shut the tailgate.

7.	Check the lamp function.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.