Main unit
| Main unit |
| General |
The main unit for the telephone system is the audio system main unit. It is connected to the wiring harness and the bus via a 26-pin connector.
The main unit performs the following tasks:
| • |
Disconnects the normal sound from the selected source during a telephone call. This is achieved by sending a mute signal to the main unit, which then disconnects the normal sound to the speakers and the signal to the external amplifier where relevant.
|
|
| • |
Receives the audio signal (line input) from the telephone (incoming sound) via the telephone contact and reproduces it via the audio system speakers.
|
|
See Test readings, control module connections
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
