Solenoids
Solenoids |
To remove |
Important | ||
Solenoids SLT, SLS and SLU that control the system pressure and Lock-up must not be dismantled! |
||
1. |
Remove the
valve housing cover
.
|
2. |
Unplug the relevant solenoid's connector.
|
3. |
Remove the solenoid's retaining bolt.
|
4. |
Prise the solenoid loose, using a screwdriver.
|
Fitting |
1. |
Position the solenoid and tighten the bolt.
Tightening torque: 7 Nm (5 lbf ft). |
2. |
Plug in the solenoid's connector.
|
3. |
Fit the
valve housing cover
.
|