Shift-lock electromagnet
Shift-lock electromagnet |
1. |
Remove the selector lever housing, see
.
|
2. |
Snip the cable ties.
|
3. |
Extract the pins for the electromagnet from the connector, pins 5, 6 and 2. Use removal tool 85 80 151.
|
4. |
Drill out the rivets that join the upper and lower part of the selector housing with a three millimetre drill bit.
|
5. |
Separate the upper and lower parts of the selector lever housing and remove the screws by the electromagnet.
|
6. |
Remove the lever from the top of the electromagnet and remove the electromagnet.
|
Fitting |
1. |
Fit the electromagnet to the lever.
|
2. |
Fit the electromagnet's two screws.
|
3. |
Fit the two parts of the selector lever housing together.
|
4. |
The selector lever housing does need to be riveted together.
|
5. |
Connect the electromagnet leads.
|
6. |
Secure the leads with cable ties.
|
7. |
Fit the selector lever housing, see
.
|