Hydraulic body, front wheel, changing
Hydraulic body, front wheel, changing |
To remove |
1. |
Raise the car and remove the wheel.
|
2. |
Press the piston back using a pair of pliers.
|
3. |
Depress the brake pedal slightly, using a brake pedal clamp.
|
4. |
Remove fuse No. 1 for the brake lights.
|
5. |
Disconnect the hose from the hydraulic body.
|
6. |
Remove the protective caps and the two hydraulic body guide pins.
|
To fit |
1. |
Fit the brake caliper and tighten its two guide pins to torque.
Tightening torque 28 Nm (21 lbf ft) |
2. |
Connect the hose to the brake caliper.
Tightening torque 45 Nm (33 lbf ft)
|
3. |
Remove the brake pedal clamp and put back the fuse.
|
4. |
Bleed the brake system
.
|
5. |
Fit the front wheels, see
Wheels
.
Tightening torques aluminium wheel 110 Nm (81 lbf ft) steel wheel 50 Nm +2x90°, max. 110 Nm (37 lbf ft +2x90°, max. 81 lbf ft) |
6. |
Lower the car to the floor and depress the brake pedal to force out the brake pistons.
|
7. |
Check the brake fluid level and top up if necessary.
|