Handbrake lever
Handbrake lever |
To remove |
1. |
Raise the car.
|
2. |
Remove the return springs and unhook the cables from the handbrake actuating levers.
|
3. |
Lower the car to the floor.
|
4. |
Remove the
centre console
and the
gaiter from the handbrake lever
.
|
5. |
Unplug the handbrake warning lamp connector.
|
6. |
Undo the cable tie securing the wiring harness.
|
7. |
Undo the handbrake lever's 4 retaining nuts.
|
8. |
Lift the handbrake lever straight up and carefully pull the entire cable equalizer assembly up through the hole and into the cabin.
|
9. |
Turn the handbrake cable through 90° and separate the cable equalizer.
|
To fit |
1. |
Insert the handbrake cable into the cable equalizer and turn it through 90°.
|
2. |
Pull the cables back slightly at the rear wheels.
|
3. |
Correctly position the complete handbrake lever assembly.
|
4. |
Fit the handbrake lever's 4 retaining nuts.
|
5. |
Use a cable tie to secure the wiring harness.
|
6. |
Plug in the handbrake warning lamp connector.
|
7. |
Fit the
centre console
and the
gaiter on the handbrake lever
.
|
8. |
Raise the car.
|
9. |
Hook the cables onto the actuating levers and fit the return springs.
|
10. |
Adjust the handbrake
.
|