Pressure sensor, tyre pressure
Pressure sensor, tyre pressure |
To remove |
1. |
Remove the wheel.
|
2. |
Remove the
tyre
.
|
3. |
Remove the sensor (A) by undoing the nut (B), then lift out the sensor.
|
To fit |
1. |
Fit the sensor with new rubber seal in the hole in the wheel rim.
|
2. |
Counterhold the sensor (A) when the nut (B) is fitted.
Tightening torque: 10 Nm (7.5 lbf ft) |
3. |
Fit the
tyre
.
|
4. |
Fit the
Wheel
.
|
5. |
Connect Tech2 and follow the instructions under Chassis - TPMS for programming the new pressure sensor.
|