SAAB WIS ONLINE

Glove box

Glove box

To remove


1. Remove the cover for the heating and ventilation unit (A).


2. Remove the lower part of the panel under the glove box, 4 screws (B). There are clips in the front edge.

3. Unplug the connector for the floor lighting from the lower part of the panel.

4. Undo 3 retaining screws under, and 3 retaining screws inside, the glove box (C).


5. Lift out the glove box slightly and unplug the connector for the glove box lighting (D).


6. Cars with A/C:

Detach the cooling hose from the heating and ventilation unit before lifting out the glove box (E).


7. Lift away the glove box.


To fit


1. Fit in the glove box slightly and plug in the connector for the glove box lighting (D).


2. Cars with A/C:

Fit the cooling hose from the heating and ventilation unit (E).


3. Lift in the glove box, screw in 3 screws under, and 3 screws inside the glove box (C).


4. Fit the floor lighting to the lower part of the panel.

5. Fit the lower part of the panel under the glove box, 4 screws and clips in the front edge (B).


6. Fit the cover for the heating and ventilation unit (A).