Sunroof assembly
Sunroof assembly |
Removing |
It is recommended that 2 people carry out steps 5 and 6.
1. |
Remove the headlining. See
Headlining, 4D
or
Headlining, 5D.
|
2. |
Remove the front interior lighting roof console. Unplug the connector for the sunroof motor and let the console hang on the wiring harness.
|
3. |
Detach the four drain hoses from the nipples on the sunroof unit.
|
4. |
Unscrew the unit, leaving one screw remaining in the front edge and one in each corner of the rear edge.
|
5. |
Together with an assistant, undo the three remaining screws and lower the unit.
|
6. |
Lift out the unit from the car.
|
Fitting |
It is recommended that 2 people carry out steps 1 and 2.
1. |
With an assistant, lift the unit in place. Ensure the guide pins on the unit are positioned in the guide holes (2 people).
|
2. |
Insert a screw at the front and one at each rear corner (2 people).
|
3. |
Fit the remaining screws holding the sunroof unit.
|
4. |
Attach the four drain hoses to their nipples.
|
5. |
Plug in the connector to the sunroof motor and fit the inner lighting roof console.
|
6. |
Check the function.
|
7. |
Fit the headlining.
|