EVAP pressure sensor (585)

/ 9-5 (9600) / 2010 / 2. Engine / Evaporative Emission System ORVR OBD II / Adjustment/replacement / EVAP pressure sensor (585)

To remove

1.	Raise the seat squab. Remove the cover from the pump.

2.	Unplug the connector and remove the pressure sensor.

To fit

1.	Fit the pressure sensor and plug in the connector.

2.	Fit the cover. Grease the rubber ring with Vaseline. Fit the seat squab.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.