SAAB WIS ONLINE

Temperature sensor, engine coolant

Temperature sensor, engine coolant

Warning

Be careful if the car is warm. The coolant is hot and there is a risk of burns from the intake manifold.


To remove


1. Carefully loosen the coolant expansion tank cap (to release any pressure) and then screw it back on.


2. Unplug the connector and remove the sensor using a 19 mm dog-leg spanner.


To fit



1. Fit the sensor. Lubricate the threads with vaseline (part no. 30 20 271) or equivalent. Fit a new sealing washer as necessary. Spray the connector with Kontakt 61 (part no. 30 04 520) and connect it to the sensor.

Tightening torque 13 Nm (9.6 lbf ft)

2. Top up with coolant as necessary after fitting.

Start the engine. Make sure there are no leaks. Top up with coolant as necessary.