P0453
Read the instructions below then start the fault diagnostic procedure.
Symptom: CHECK ENGINE.
P0453 |
Fault symptoms
• |
CHECK ENGINE.
|
On-Board Diagnostics
Type of diagnosis:- |
Continuous. But interrupted when fault criteria fulfilled and will not restart until next driving cycle.
|
Enable criteria:
- |
Engine running.
|
Fault criteria:
- |
Voltage higher than 4.950 V for more than 5 s.
|
Dependents:
- |
None.
|
System reaction to a fault:
- |
Integrity diagnosis of purge system blocked.
|
Fault handling: (See section Fault handling III, other emission-related components and functions for more information.)
- |
Type III.
|
Diagnostic help
Fault diagnosis concerns an electrical fault in connecting leads or in the sensor.Functions in the diagnostic tool related to the fault:
• |
Diagnostic status for the diagnosis.
|
• |
Pressure sensor value, unit kPa. The value should be about 0 kPa when the filler cap is removed.
|
See also description of read value under "Read Values" menu for more information.
Check the wiring
Jiggle the leads and in-line connectors at various points and in different directions to detect any intermittent breaks or short circuits in the wiring. Observe the multimeter, test lamp or diagnostic tool while doing this.See P0452 .