Theft protection
| Theft protection |
| General |
The audio system is equipped with electronic theft protection. Information concerning the theft-protection device is connected in the form of a code to the audio system of the car in which it is installed. Programming is performed with the diagnostic tool.
| Function |
Theft protection is effected by “marrying” the head unit to the car. If such a “marriage” has not occurred, "LOCKED" will be displayed when attempting to activate the audio system.
The audio system checks at regular intervals that the theft protection information is correct (if “marriage” has occurred). This applies also if +30 is temporarily disconnected. If the information is not correct the display shows "LOCKED".
| Important | ||
|
The audio system is “married/divorced” to/from the car with the diagnostic tool. Divorce can only be performed in the original vehicle, and with the correct ignition key in the ignition switch. |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
