Calibration of headlamp/AHL control module
|
Calibration of headlamp/AHL control module
|
Check the following points before carrying out calibration.
-
|
The car must be unladen.
|
-
|
Stabilise the suspension by rocking the car.
|
-
|
The handbrake must not be applied.
|
-
|
The steering wheel and wheels must be in the straight-ahead position.
|
-
|
Ignition switch in ON position.
|
-
|
The xenon lamps must be turned on.
|
-
|
Battery voltage must be >10.5 V.
|
Connect the diagnostic tool and calibrate the headlamp/AHL control module.
Check the function of the headlamps and clear any trouble codes.
Check the headlamp alignment and adjust if necessary. Refer to
Headlamp alignment
.