SAAB WIS ONLINE

Fog lights

Fog lights

Removal


1. Raise the car.

2. Unplug the connector.


3. Remove the lamp housing.


Refitting


1. Fit the lamp housing.


2. Spray with “Kontakt 61” and plug in the connector.

3. Lower the car.

4. Adjust the lamp, se .

5. Ensure that the on/off function of the fog lights comply with legal requirements.


Replacement of lamp bulb


1. Raise the car.

2. Remove the bulb socket by slightly rotating it anticlockwise.


3. Unplug the connector.

4. Replace the bulb

5. Plug in the connector.


6. Fit the lamp socket and rotate it clockwise.


Programming


The DICE system can be programmed for three different types of front fog light logic:


• Alternative 1 - The front fog lights may be on independently of the main and dipped beams if the light switch (10) is in position 1 or 2.

• Alternative 2 - The front fog lights cannot be turned on when the main beam is on. The light switch must be in position 2 for headlamp alternative 3 and in position 1 or 2 for headlamp alternatives 1 and 2.

• Alternative 3 - The front fog lights can be turned on if the light switch is in position 2 and the main beam is on or if the light switch is in position 1 (no headlamps).