SAAB WIS ONLINE

Headlamps

Headlamps

Removal


1. Remove the upper plastic clips and the screws.


2. Remove the screws from the wing liner.


3. Free the bumper shell by freeing the hook with a screwdriver. Bend the shell forwards and place a support under so that it is not damaged.


4. Remove the bolts.


5. Lift out the headlamp and unplug the connector.



Refitting


1. Plug in the connector.

Important

Make sure the headlamp drain hose is not pinched. The hose must not be kinked.



2. Position the headlamp correctly.


3. Fit the upper and lower bolts.

4. Adjust the spacer bolt so that it lightly contacts the headlamp mounting on the chassis.

5. Fit the bolt.

6. Position the bumper shell correctly.

Note

Ensure that the connector is correctly fitted in its housing.



7. Fit the upper plastic clips and the screws.

8. Fit the wing liner bolts.


9. Check headlamp alignment and adjust as necessary, see Headlamp adjustment .