SAAB WIS ONLINE

B3410

Read the instructions below then start the fault diagnostic procedure.

Symptom: Warning lamp on in MIU.

B3410


Front Load Angle Sensor, Open circuit, shortage to B+/ground


Warning

HIGH TENSION

The headlamp/AHL control module and xenon headlamp ignition transformer generate a voltage in excess of 23 000 V. This voltage can be lethal to individuals with a weak heart or pacemaker. Treat this system with great respect and turn off the ignition before working on the system's components.


Warning

Read through Safety and handling instructions, headlamps with xenon bulbs before starting.


Fault symptoms

Warning lamp on in MIU.

Enable criteria

Xenon lamp on.

Fault criteria

Incorrect signal from front load angle sensor.

System reaction to a fault

In case of a fault in the signal from the front load angle sensor, the headlamp reflectors will be controlled by the rear load angle sensor only for as long as the fault persists.

Checking the wiring harness

Jiggle the wiring harness at several points and in different directions to detect intermittent breaks and short-circuits in the leads. Observe the multimeter, test lamp or diagnostic tool during the test.

Diagnostic help

The diagnostic trouble codes can also be generated if the load angle sensor is incorrectly fitted.

Check that the load angle sensor is correctly fitted before starting fault diagnosis.