Windscreen washer nozzles
| Windscreen washer nozzles |
| Changing |
| 1. |
Loosen the bottom edge of the bonnet insulation.
|
|
| 2. |
Disconnect the hose from the nozzle.
|
|
| 3. |
Remove the nozzle by pressing in the lock tabs.
|
|
| 4. |
Press the new nozzle into place and connect the hose.
|
|
| 5. |
Fit the bonnet insulation.
|
|
| 6. |
Close the bonnet. Adjust the nozzle spray pattern
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
