Emblem, 4D boot lid
Emblem, 4D boot lid |
Emblems are delivered as a spare part in a package consisting of a frame with a transparent window and protective tape on the backside. The following description shows how the emblem is to be affixed. Use the frame as a template when measuring the boot lid.
To remove |
Protect the paintwork with tape around the emblem. Use a putty knife to carefully prise under the emblem.
To fit |
First wash the area where the emblem is to be mounted with pure benzine.
Note | ||
The emblems and the car body must be at room temperature (approx. 20°C, 68°F) before the emblem can be affixed. |
1. |
Remove the protective tape backing from the emblem and leave the emblem in the frame.
|
2. |
Fit the frame on the boot lid following the measurements of the illustration and affix the emblem.
|
3. |
Remove the frame.
|