Pressure sensor

/ 9-5 (9600) / 2010 / 8. Body / Heating and ventilation, A/C / Adjustment/replacement / Pressure sensor

To remove

1.	Raise the car.

2.	Unplug the connector from the pressure sensor.

3.	Remove the pressure sensor.

To fit

1.	Fit the pressure sensor to the condenser. Tightening torque: 7-9 Nm (5-7 lbf ft)

2.	Plug in the connector to the pressure sensor.

3.	Lower the car to the floor.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.