SAAB WIS ONLINE

Light switch

Light switch

To remove


1. Remove the electrical centre cover.


2. Press the switch out from the inside with your hand in through the hole at the electrical centre.

Important

Take care when releasing the locking mechanism on the connector so as not to damage the connector. Pull the halves straight apart to avoid bending the pins. For further information regarding connectors, refer to Connectors, handling and inspection .


3. Remove the connector.


To fit

Important

Take care when plugging in the connector so as not to damage or press out the pins/sleeves in the connector. For further information regarding connectors, refer to Connectors, handling and inspection .



1. Plug in the connector.


2. Press the light switch into the panel.

3. Fit the electrical centre cover.