B2434
Read the instructions below then start the fault diagnostic procedure.
Symptom: No heat in the seat.
| B2434 |
Fault symptoms
| • |
No heat in the seat.
|
|
Input conditions:
| - |
Ignition ON
|
|
Fault criteria:
| - |
The control module receives a signal that is too high when the output is not activated.
|
|
For more information see also:
- The "Read Values" menu for a description of read values.
- The "Activations" menu for a description of application areas.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
