9-5 (9600) FaultTrace Mode

Checking the lead from the 16-pin connector and lock-up solenoid

Connect test lamp 86 11 857 to B+ and pin 2 of the female connector.

• Move the wiring harness at several spots and in several directions to reveal intermittent breaks and short-circuits. Check switches, connectors and crimp connections for oxidation, retracted pins and pin clamping force.

The test lamp should light.

Is the function correct?

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.

Our Friends