Transport supports
| Transport supports |
| 1. |
Cut away the cable ties.
|
|
| 2. |
Remove the transport supports which are fitted between the spring coils on the front springs. There are two supports on each side.
Save the transport supports for use if the vehicle shall be transported again. |
|
Caution
After the transport supports have been removed the vehicle must not be transported using any type of vehicle transport. The vehicle's body design, along with the relatively low ground clearance, means that the front bumper could then be damaged.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
