Coolant, freezing point and level
|
|
Coolant, freezing point and level
|
Warning
|
|
The cooling system is under pressure. Hot coolant and steam can escape.
|
|
- Open the cap slowly to release the pressure.
|
|
- Carelessness can cause eye and burn injuries
|
|
|
|
|
|
|
1.
|
Switch the engine off and let the engine cool down.
|
|
2.
|
Remove the expansion tank cap.
|
|
3.
|
Use 32 025 077 Fluid tester and check the coolant's freezing point. Adjust if necessary, use 40 - 93 170 402 Coolant. (The coolant is mixed with water, equal parts of each.)
|
|
4.
|
Check coolant level and correct the coolant to "COLD" mark if necessary (black arrows).
|
|
5.
|
Fit the expansion tank cap.
|
|
1.
|
Switch the engine off and let the engine cool down.
|
|
2.
|
Remove the expansion tank cap.
|
|
3.
|
Use 32 025 077 Fluid tester and check the coolant's freezing point. Adjust if necessary, use 40 - 93 170 402 Coolant. (The coolant is mixed with water, equal parts of each.)
|
|
4.
|
Check coolant level and correct if necessary. Correct level for cold, vented system (filling level) is the mark for "cold" (1).
|
|
5.
|
Fit the expansion tank cap.
|
