SAAB WIS ONLINE

Pre-delivery service

Pre-delivery service

The materials required for the pre-delivery service are enclosed in the vehicle's glove box and luggage compartment.


1. Unlock the vehicle.

2. Remove the Paint protector film .

3. Remove the Transport supports from the suspension.

4. Remove Transit protection, brake discs (certain markets).

5. Perform Battery check/test . Check that the battery's terminal clamps are securely fastened. Charge the battery 60 days after the production date.

Important

If possible, the battery should be checked before the car is started in order to prevent misleading results due to "top charging". If the car has already been started, wait 20 minutes before connecting the battery analyser.


6. Fit the battery cover.

7. Check tyre pressure and check that the repair spray can and tool kit are complete.

8. Check the level and top up the following fluids:

- Washer fluid

- Engine Oil

- Coolant

- Brake Fluid

- Power steering fluid

9. Remove the protection from, amongst other things, the following locations in the cabin:

- Seats

- The steering wheel

- Floor, driver's side

- Sills, front

- Navigation unit display

10. Fit the extra mats in place (not US/CA).

11. Remove the VIN label from the side window on the rear door.

12. Take out the enclosed parts from the glove box.

13. Deactivate vehicle transport mode (applies to certain markets only), refer to Transport Mode Deactivation .

14. Set the date and time. Refer to the vehicle owners manual.

15. Check the function of the washer and wiper system.

16. Check the front seats' heating.

17. Multi-info display (MID), Triple-info display (TID). Check the radio, remote control, function check, infotainment, language setting.

18. Clear the diagnostic trouble codes in all systems.

19. Program the electric windows, see Window motor, programming and setting .

20. Fit the number plate in accordance with the instructions. Fit Number plate, front , Number plate, rear (not US/CA) .

21. Remove the towing eye, close the cover, remove the spare wheel and place the towing eye in the tool compartment. Fit the spare wheel if included

22. Retighten the wheel nuts. Tightening torque: 150 Nm

23. Vehicles with steel rims: Fit wheel trims.

24. Check all locks: bonnet, doors (door closing, child safety locks), rear seat backrests, filler cap, bootlid/tailgate.

25. Diesel vehicles: Check that the filler cap is marked "Diesel". Applies to Croatia and Serbia only.

26. Visual inspection of parking brake (unloaded wheels), brake lines and brake hoses, fuel lines, silencer, exhaust system, front suspension, rear suspension, track rods, link arms, power unit sealing integrity.

27. Road test the vehicle.

28. Check that no new diagnostic trouble codes have been detected in any system.

29. Clean the vehicle.