Camshaft Housing Installation

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Camshaft Housing Installation

1.	Install a NEW camshaft housing gasket.

2.	Install the camshaft housing (2).

3.	Refer to Fastener Caution . Note Different bolt lengths. Install the 18 camshaft housing bolts (1) and tighten to 25 Nm (19 lb ft) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.