SAAB WIS ONLINE

Engine Block Core Hole Plug Removal - Timing Side

Engine Block Core Hole Plug Removal - Timing Side



1.
Note

Do not bore, because swarf can fall into the oil channel and damage the engine.


Strike a hole into the plug (2).


2. Use a suitable tool (1).

3. The diameter should amount 6 to 7 mm (0.236 to 0.275 in).


4.
Note

Do not damage the sealing surface.


To remove the core hole plug (1) put a suitable tool (2) into the hole and push in direction of the arrow.


5. Remove the old gasket material.