Exhaust Pressure Sensor Installation

/ 9-5 (9650) / 2010 / 2. Engine / Basic engine, 4-cylinder diesel / Adjustment/replacement / Exhaust Pressure Sensor Installation

1.	Install the exhaust pressure sensor (1).

2.	Install the exhaust pressure sensor pipe.

3.	Install the exhaust pressure sensor pipe clamp.

4.	Refer to Fastener Caution . Install the exhaust pressure sensor nut (2) and tighten to 9 Nm (80 lb in) .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.